’10-14 Ford Raptor Lower Control Arms


RPG Off-Road ’10-14 Ford Raptor Lower Control Arm Kit

  • The Most Tested, Best Engineered and Most Versatile Arm Available.
  • Option to add Secondary Shock Mount OR Sway Bar Tab
  • Chromoly Steel
  • FK 1.5″ PTFE Lined Stainless Uniball Bearings
  • Requires Fox Factory Race Series or Aftermarket 3.0 Coilovers
  • Dual Shock Mount Options Requires 0mm Offset Wheel

Kit includes bearings and necessary hardware for installation. Shipped with bearings pre-pressed for a bolt-in installation.



Here at RPG Off-Road we set out to develop a lower control arm for the Raptor that would not only enhance the drive of the vehicle, but also offer more versatility to the front suspension. The ’10-14 Ford Raptor Lower Control Arm Kit features a race-car inspired box construction arm with all three pivot locations attached via robust 1.5″ FK Rod Ends spherical bearings pressed into bearing cups that are welded on both the inside and out, totaling over 1 foot of weld on each bearing cup for added strength and security. We continued this welding approach to the vast majority of the inside construction. The arm itself has been tested for years now producing incredible results. It was developed around a Fox Factory Race Series 3.0 or King OEM Performance Series 3.0, and can be optioned with a Dual Shock Mount to run a Fox or King 3.0 External Bypass shock. Icon, ADS, and Bilstein can be used as well.

Over the years of testing we’ve learned a great deal about the geometry that was needed for optimum ride performance. The arm will bolt right up on the chassis side of things using upgraded Grade 8 hardware, plus custom machined center-pins tapered to fit the factory knuckle. The arms are finished with a  beautiful titanium powder coat to last for the long haul.  However, the best and most versatile part of the arm is found sitting on the back side.  When bolting up the ’10-14 Ford Raptor Lower Control Arm Kit, you will be able to run a Fox or King 3.0 External Bypass shock. The control is amazing and the damping power is light years beyond any single 3.0″ setup that will ultimately take you into terrain that was otherwise unthinkable. With our new Lower Control Arm and Dual shock setup, jumps that used to leave you cringing are now nothing more than mellow launching pads keeping you yurning for more.  And just like every other part we produce, you will receive the peace of mind knowing that you will be bolting on an arm that has been tested harder than any other arm available now, plus the added security of knowing its backed by our *Lifetime Warranty against manufacturing defects.

Introducing Total Control by RPG Off-Road:

The Highlights:

  • Dual Fox or King 3.0″ Shock Capable.
  • Race-Car Inspired Box Construction
  • 1.5″ FK Spherical Bearing Cups Welded Both Inside and Out Totaling Over 1 Foot of Weld Per Bearing Cup!
  • Custom Machined Center Pins Tapered to Fit The Factory Knuckle.
  • Direct Bolt-On Using In-House CNC Machined Misalignments
  • Grade 8 Chassis Side Mounting Bolts That Are Both Longer and Stronger to Prevent Bending and the Nut from Backing Off
  • Internally Plated and Welded
  • Fabricated in the USA; fits all generation Raptors
  • FOX Factory Race Series 3.0 Coilovers or any other OEM Replacement Coilover REQUIRED, OEM coilover will not work.
  • Dual Shock Mount option will require an aftermarket wheel with a minimum of 0mm offset. (17×8.5 or 17×9 with 4.75″ or 5″ of backspacing recommended).
Additional Information
Weight 90 lbs
Dimensions 30 × 24 × 10 in

Single Shock (w/ Sway Bar Tab), Dual Shock (Mount for 3.0 External Bypass)

Reviews (0)


There are no reviews yet.

Be the first to review “’10-14 Ford Raptor Lower Control Arms”

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.